device manager?
Q. I'm trying to add any peripheral. Alaser logitech keyboard at the moment .Each item,say the printer had to be installed by running the software then updati9ng it using device manager although the compouter beeps as the device is plugged in
Asked by DOUGLAS S - Sun Jan 28 11:46:53 2007 - - 4 Answers - 0 Comments
A. Hi, Sorry about the problem. I don't understand the question. Do you have windows XP? You should only need to plug it in and Windows XP should do the rest.
Answered by jt_technical_services - Sun Jan 28 11:56:56 2007
Q. I'm trying to add any peripheral. Alaser logitech keyboard at the moment .Each item,say the printer had to be installed by running the software then updati9ng it using device manager although the compouter beeps as the device is plugged in
Asked by DOUGLAS S - Sun Jan 28 11:46:53 2007 - - 4 Answers - 0 Comments
A. Hi, Sorry about the problem. I don't understand the question. Do you have windows XP? You should only need to plug it in and Windows XP should do the rest.
Answered by jt_technical_services - Sun Jan 28 11:56:56 2007
How do I correct the device manager entry that is on my computer?
Q. My HP 522n thinks I have a CD-Rom instead of a CD-RW. I found a note saying my disk Drive is a Samsung SV6003H but my device manager thinks I have a CD- ROM. (This note may refer to another computer, but I know my computer has a CD-RW!) Do I have to change the drive? Can I change it by going into Boot information? My software is Microsoft Windows XP. Any suggestions are welcome. It does not mean I will try this myself since I am not a programmer. I want to have an idea what the repair person may do.
Asked by femalegtrst - Fri Jul 7 19:43:09 2006 - - 3 Answers - 0 Comments
A. I would first consider deleting the device from device manager and reboot the system. In many cases Windows will find and identify the device correctly. I don't think it's likely that you need to manually change any boot information (BIOS). If reboot doesn't work out, try manually installing the hardware in Windows Control Panel. Install the driver from CD if you have one, or download from the manufacturer's website.
Answered by Enoch - Fri Jul 7 19:53:52 2006
Q. My HP 522n thinks I have a CD-Rom instead of a CD-RW. I found a note saying my disk Drive is a Samsung SV6003H but my device manager thinks I have a CD- ROM. (This note may refer to another computer, but I know my computer has a CD-RW!) Do I have to change the drive? Can I change it by going into Boot information? My software is Microsoft Windows XP. Any suggestions are welcome. It does not mean I will try this myself since I am not a programmer. I want to have an idea what the repair person may do.
Asked by femalegtrst - Fri Jul 7 19:43:09 2006 - - 3 Answers - 0 Comments
A. I would first consider deleting the device from device manager and reboot the system. In many cases Windows will find and identify the device correctly. I don't think it's likely that you need to manually change any boot information (BIOS). If reboot doesn't work out, try manually installing the hardware in Windows Control Panel. Install the driver from CD if you have one, or download from the manufacturer's website.
Answered by Enoch - Fri Jul 7 19:53:52 2006
How do I restore the wireless adapter in the device manager under the network adapters?
Q. I was using my laptop and the internet was fine. Then I go back on in a couple of hours and the internet was gone. I check the device manager and the wireless adapter's not there. Also, the wireless connection icon isn't in the network connections. It's been like that for a couple of days and I'm kinda scared. Also, it's happened before. I mean that the wireless connection would disappear, but it would come back though. Please help me and thank you.
Asked by Kevin - Tue Dec 30 00:45:25 2008 - - 1 Answers - 0 Comments
A. Go to the website of the laptop's manufacturer and download the wireless adapter drivers, then install them.
Answered by R. M - Tue Dec 30 01:01:53 2008
Q. I was using my laptop and the internet was fine. Then I go back on in a couple of hours and the internet was gone. I check the device manager and the wireless adapter's not there. Also, the wireless connection icon isn't in the network connections. It's been like that for a couple of days and I'm kinda scared. Also, it's happened before. I mean that the wireless connection would disappear, but it would come back though. Please help me and thank you.
Asked by Kevin - Tue Dec 30 00:45:25 2008 - - 1 Answers - 0 Comments
A. Go to the website of the laptop's manufacturer and download the wireless adapter drivers, then install them.
Answered by R. M - Tue Dec 30 01:01:53 2008
Why am I unable to change hardware properties in Device Manager?
Q. My computer keeps waking itself up from sleep mode. I tried to implement the solution of changing properties for hardware devices in Device Manager, but when I right click on a device and then click on Properties, the only thing that comes up is an icon for the device. There are absolutely no options listed. so I am unable to change anything related to any device. Does anyone have a solution for this?
Asked by kencorse - Thu Aug 6 07:47:41 2009 - - 1 Answers - 0 Comments
A. make sure WOL or wake up on lan is disabled, you can change this from the network cards settings
Answered by mike H - Thu Aug 6 07:52:36 2009
Q. My computer keeps waking itself up from sleep mode. I tried to implement the solution of changing properties for hardware devices in Device Manager, but when I right click on a device and then click on Properties, the only thing that comes up is an icon for the device. There are absolutely no options listed. so I am unable to change anything related to any device. Does anyone have a solution for this?
Asked by kencorse - Thu Aug 6 07:47:41 2009 - - 1 Answers - 0 Comments
A. make sure WOL or wake up on lan is disabled, you can change this from the network cards settings
Answered by mike H - Thu Aug 6 07:52:36 2009
How do I install a hard drive (wd1600aajs) I see it on the device manager but not in the explorer?
Q. I even check it with the western digital tool "data life gard" and it pass the test, the device manager shows no problems. It is a sata II, and my motherboard has 2 sata (pcchips a13g+ v3.0)
Asked by rdariomty - Thu May 21 10:03:28 2009 - - 1 Answers - 0 Comments
A. go to disk managment, create partition/format ??? profit
Answered by ferjero989 - Thu May 21 10:08:15 2009
Q. I even check it with the western digital tool "data life gard" and it pass the test, the device manager shows no problems. It is a sata II, and my motherboard has 2 sata (pcchips a13g+ v3.0)
Asked by rdariomty - Thu May 21 10:03:28 2009 - - 1 Answers - 0 Comments
A. go to disk managment, create partition/format ??? profit
Answered by ferjero989 - Thu May 21 10:08:15 2009
Why is there two Monitors listed in Device Manager in XP Pro?
Q. In my Device Manager, its listed as two Monitors, However I dont have two Monitors installed, I only have one Monitor installed. I tried to uninstall the First one, I rebooted, and its still there. I did the same thing to the other one, and its still there.. Oh and I dont even use a Video card or a Graphics card, I use the VGA Port.
Asked by RaffiTheMaster - Tue Dec 9 13:12:20 2008 - - 1 Answers - 0 Comments
A. no video card?! maybe you mean you have a build-in video card, you've just mentioned the VGA port... if you see a two monitors installed, it just means that your video or graphic card is capable to use more than 1 monitor, this video card have a tv-out terminal, which means you have a primary monitor that is ENABLE and a secondary monitor which default value is DISABLE, that you can set it to ENABLE if you want to use other monitor like the TV.
Answered by DaRkGiFt - Tue Dec 9 13:40:47 2008
Q. In my Device Manager, its listed as two Monitors, However I dont have two Monitors installed, I only have one Monitor installed. I tried to uninstall the First one, I rebooted, and its still there. I did the same thing to the other one, and its still there.. Oh and I dont even use a Video card or a Graphics card, I use the VGA Port.
Asked by RaffiTheMaster - Tue Dec 9 13:12:20 2008 - - 1 Answers - 0 Comments
A. no video card?! maybe you mean you have a build-in video card, you've just mentioned the VGA port... if you see a two monitors installed, it just means that your video or graphic card is capable to use more than 1 monitor, this video card have a tv-out terminal, which means you have a primary monitor that is ENABLE and a secondary monitor which default value is DISABLE, that you can set it to ENABLE if you want to use other monitor like the TV.
Answered by DaRkGiFt - Tue Dec 9 13:40:47 2008
How can i add my monitor to device manager?
Q. I have just reformatted and re-installed windows xp profesional sp3- then i try to change the screen resolution and colors but it is stuck on 16 bit and 640 by 480 pixels. I had gone to the device manager to check the monitor drivers and the monitor tab is missing, and I dont have any sound, I was wondering if anybody had any solutions for this problem, Any help would be greatly appreciated. Thanks
Asked by alexredfire06 - Mon Jul 7 18:07:05 2008 - - 1 Answers - 0 Comments
A. Two/maybe three things you need to do, You will need to download the drivers for your monitor, your video card (or onboard video) and your sound card or onboard. to do this you need the exact make and model of your hardware then try to find the companies websites who make the products and browse their support sections for drivers. There are a number of other website that offer drivers that might help you for your model however some of them charge for the service. More Computer and Internet Resources at
Answered by mrv - Mon Jul 7 20:14:59 2008
Q. I have just reformatted and re-installed windows xp profesional sp3- then i try to change the screen resolution and colors but it is stuck on 16 bit and 640 by 480 pixels. I had gone to the device manager to check the monitor drivers and the monitor tab is missing, and I dont have any sound, I was wondering if anybody had any solutions for this problem, Any help would be greatly appreciated. Thanks
Asked by alexredfire06 - Mon Jul 7 18:07:05 2008 - - 1 Answers - 0 Comments
A. Two/maybe three things you need to do, You will need to download the drivers for your monitor, your video card (or onboard video) and your sound card or onboard. to do this you need the exact make and model of your hardware then try to find the companies websites who make the products and browse their support sections for drivers. There are a number of other website that offer drivers that might help you for your model however some of them charge for the service. More Computer and Internet Resources at
Answered by mrv - Mon Jul 7 20:14:59 2008
I'm getting this error message when I try to play my pc game. How do I get to the Device manager?
Q. You are trying to start a copy-protected application which requires the original disc to be in the CD/DVD-ROM drive. Please check to make sure your disc is an original." Open the Device Manager. Double-click IDE ATA/ATAPI Controllers to display the list of controllers and channels. Right-click the icon for the channel to which your CD/DVD drive is connected, select Properties, and then click the Advanced Settings tab.
Asked by oreobabylove - Sat Jan 27 13:52:59 2007 - - 5 Answers - 0 Comments
A. For Windows XP: Right-click My Computer. Go to Properties. Click on Hardware Tab. There will be a button in there that says Device Manager.
Answered by raisin85 - Sat Jan 27 14:00:51 2007
Q. You are trying to start a copy-protected application which requires the original disc to be in the CD/DVD-ROM drive. Please check to make sure your disc is an original." Open the Device Manager. Double-click IDE ATA/ATAPI Controllers to display the list of controllers and channels. Right-click the icon for the channel to which your CD/DVD drive is connected, select Properties, and then click the Advanced Settings tab.
Asked by oreobabylove - Sat Jan 27 13:52:59 2007 - - 5 Answers - 0 Comments
A. For Windows XP: Right-click My Computer. Go to Properties. Click on Hardware Tab. There will be a button in there that says Device Manager.
Answered by raisin85 - Sat Jan 27 14:00:51 2007
There is a yellow exclamtion point next to PCI modem in device manager.My internet doesnt work.How do i fix it
Q. I have a sony desktop. My internet just stopped working. I uninstalled the PCI modem in my device manager. The modem is fine because i can still connect wirelessly with my laptop. I can't use the internet on my desktop so i can't go online and download anything. I'm trying to see if there is another way to fix it than to reboot my computer.
Asked by adotnguyen - Sat Jun 28 23:50:47 2008 - - 4 Answers - 0 Comments
A. You uninstalled the desktop internal modem. The wireless connection on your laptop is irrelevant. You need to reinstall the modem. In device manager, right-click on the computer name (the top line) and click on Scan for hardware changes. Then reinstall your modem. And consider staying out of device manager.
Answered by conehead - Sat Jun 28 23:59:04 2008
Q. I have a sony desktop. My internet just stopped working. I uninstalled the PCI modem in my device manager. The modem is fine because i can still connect wirelessly with my laptop. I can't use the internet on my desktop so i can't go online and download anything. I'm trying to see if there is another way to fix it than to reboot my computer.
Asked by adotnguyen - Sat Jun 28 23:50:47 2008 - - 4 Answers - 0 Comments
A. You uninstalled the desktop internal modem. The wireless connection on your laptop is irrelevant. You need to reinstall the modem. In device manager, right-click on the computer name (the top line) and click on Scan for hardware changes. Then reinstall your modem. And consider staying out of device manager.
Answered by conehead - Sat Jun 28 23:59:04 2008
my hard drive is showing up in the device manager but not in explorer?
Q. I've had the drive for 2 years and its my storage drive. its showing up on the device manager but when i try to access it...nothing. it's worked fine since today. is there a program i can buy that will help me?
Asked by ibleedgreencda - Mon Jun 23 10:56:11 2008 - - 3 Answers - 0 Comments
A. you might want to change the drive letter... Control Panel Administrative Tools > Disk Management
Answered by Marcus B - Mon Jun 23 11:04:17 2008
Q. I've had the drive for 2 years and its my storage drive. its showing up on the device manager but when i try to access it...nothing. it's worked fine since today. is there a program i can buy that will help me?
Asked by ibleedgreencda - Mon Jun 23 10:56:11 2008 - - 3 Answers - 0 Comments
A. you might want to change the drive letter... Control Panel Administrative Tools > Disk Management
Answered by Marcus B - Mon Jun 23 11:04:17 2008
How can I show Device Manager as a direct shortcut in Windows XP Control Panel?
Q. I would like to access Device Manager directly, without going through System>System Properties>Hardware>Devic e Manager rigmarole. Can I place a direct shortcut to DM in XP's Control Panel? Thanks Sullivan. Your advice is much appreciated - and definitely on my "Save to hard-copy" list which I am now printing out!
Asked by alba - Wed Sep 23 12:09:45 2009 - - 1 Answers - 0 Comments
A. I don't think you can, because the icons in Control Panel are a result of enumerating .cpl files, and there is no .cpl file specifically for Device Manager. (.cpl files are basically .dll's with particular requirements on entry points and icons) However if you make a shortcut for devmgmt.msc you can put that shortcut on your desktop or anywhere else. Just fyi, "computer management", aka "manage" from right-clicking "My Computer", is compmgmt.msc. You can get to device manager from there, too. "Disk manager" is diskmgmt.msc. You can find other .msc's in \windows\system32. Alternately, you can use Windows-R and type devmgmt.msc into the Run prompt.. The Run prompt remembers the last few things you start that way and Device Manager is… [cont.]
Answered by Sullivan - Wed Sep 23 12:20:42 2009
Q. I would like to access Device Manager directly, without going through System>System Properties>Hardware>Devic e Manager rigmarole. Can I place a direct shortcut to DM in XP's Control Panel? Thanks Sullivan. Your advice is much appreciated - and definitely on my "Save to hard-copy" list which I am now printing out!
Asked by alba - Wed Sep 23 12:09:45 2009 - - 1 Answers - 0 Comments
A. I don't think you can, because the icons in Control Panel are a result of enumerating .cpl files, and there is no .cpl file specifically for Device Manager. (.cpl files are basically .dll's with particular requirements on entry points and icons) However if you make a shortcut for devmgmt.msc you can put that shortcut on your desktop or anywhere else. Just fyi, "computer management", aka "manage" from right-clicking "My Computer", is compmgmt.msc. You can get to device manager from there, too. "Disk manager" is diskmgmt.msc. You can find other .msc's in \windows\system32. Alternately, you can use Windows-R and type devmgmt.msc into the Run prompt.. The Run prompt remembers the last few things you start that way and Device Manager is… [cont.]
Answered by Sullivan - Wed Sep 23 12:20:42 2009
Why are so many items listed under USB controllers in device manager?
Q. I have four usb ports. There are five "USB root Hub" listed in device manager and four Intel(R) 82801G (ICH7) USB universal host controllers. One USB2 enhanced host controller. I'm not having any problems; I was just wandering why so many are listed. There should only be four listed since I only have four ports? If you unplug a device w/out "removing it" first does it add another one to the list? I've seen other computers with many more than this listed. Thanks
Asked by mcintire1980 - Sun Aug 31 23:57:55 2008 - - 1 Answers - 0 Comments
Q. I have four usb ports. There are five "USB root Hub" listed in device manager and four Intel(R) 82801G (ICH7) USB universal host controllers. One USB2 enhanced host controller. I'm not having any problems; I was just wandering why so many are listed. There should only be four listed since I only have four ports? If you unplug a device w/out "removing it" first does it add another one to the list? I've seen other computers with many more than this listed. Thanks
Asked by mcintire1980 - Sun Aug 31 23:57:55 2008 - - 1 Answers - 0 Comments
Why is my CPU speed slower than what it should be according to the Device Manager?
Q. I am on a Sony VIAO using a Core 2 Duo T7300. Under Device manager it says that the CPU is at 2GHz each, but under system settings and everything else it says that I am at 1.8GHz only... why is it lower, and how can I raise it up to the 2GHz it should be at?
Asked by zanfankid - Sat Jul 11 16:29:22 2009 - - 3 Answers - 0 Comments
A. Are you sure you have a T7300? There is a known issue with Vaio's and Windows Vista where the CPU will show as higher than it actually is within device manager.
Answered by jason c - Sat Jul 11 16:41:09 2009
Q. I am on a Sony VIAO using a Core 2 Duo T7300. Under Device manager it says that the CPU is at 2GHz each, but under system settings and everything else it says that I am at 1.8GHz only... why is it lower, and how can I raise it up to the 2GHz it should be at?
Asked by zanfankid - Sat Jul 11 16:29:22 2009 - - 3 Answers - 0 Comments
A. Are you sure you have a T7300? There is a known issue with Vaio's and Windows Vista where the CPU will show as higher than it actually is within device manager.
Answered by jason c - Sat Jul 11 16:41:09 2009
Why can't I see my wireless network adapter in device manager?
Q. I have downloaded and installed the proper broadcom driver for my hp6405us laptop with vista 32 bit. Still doesn't work or even show up in the device manager. Any ideas? Wireless switch on laptop is on. I should also mention it has built in wireless, not a pcmcia or pc card.
Asked by CO2isnotpollution - Thu Sep 10 16:07:28 2009 - - 1 Answers - 0 Comments
A. on the back of the unit is a slot, much like a memory slot. its will be different because it has two or three antennas hook to it. do not pull them out. just remove the card and power on the pc. let it post and get into window. than shut down and put the card back in. boot up. it should find the card this time.
Answered by identity - Thu Sep 10 16:10:53 2009
Q. I have downloaded and installed the proper broadcom driver for my hp6405us laptop with vista 32 bit. Still doesn't work or even show up in the device manager. Any ideas? Wireless switch on laptop is on. I should also mention it has built in wireless, not a pcmcia or pc card.
Asked by CO2isnotpollution - Thu Sep 10 16:07:28 2009 - - 1 Answers - 0 Comments
A. on the back of the unit is a slot, much like a memory slot. its will be different because it has two or three antennas hook to it. do not pull them out. just remove the card and power on the pc. let it post and get into window. than shut down and put the card back in. boot up. it should find the card this time.
Answered by identity - Thu Sep 10 16:10:53 2009
i have a laptop i canot connect through my charter internet when i go to device manager?
Q. when i go to device manager it is a yellow exclamation mark what can i do?
Asked by Gregg & Laurie W - Sat May 10 11:40:39 2008 - - 2 Answers - 0 Comments
A. the yellow exclamation sign means a driver is missing in your computer, identify it and download it from your manufacture's website or the device manufacturer, download it and place it in your computer, then go to device manager again and select reinstall driver and let the wizard look for it in advanced or custom, and select the folder where you placed the driver, the wizard will automatically look and install it, BTW what kind of driver u missing?
Answered by Marco Franco - Sat May 10 11:50:57 2008
Q. when i go to device manager it is a yellow exclamation mark what can i do?
Asked by Gregg & Laurie W - Sat May 10 11:40:39 2008 - - 2 Answers - 0 Comments
A. the yellow exclamation sign means a driver is missing in your computer, identify it and download it from your manufacture's website or the device manufacturer, download it and place it in your computer, then go to device manager again and select reinstall driver and let the wizard look for it in advanced or custom, and select the folder where you placed the driver, the wizard will automatically look and install it, BTW what kind of driver u missing?
Answered by Marco Franco - Sat May 10 11:50:57 2008
Why do I get a message that my floppy drive is empty when my device manager tells my my device is working?
Q. Every time I try to use my floppy drive to back-up my computer or to run a floppy or copy any information onto a floppy disk I get a message that says, "the drive is empty please insert a disk and retry",but my device manager says that my device is working properly . And when I try to update my driver I get a message that says that it cannot find a better one than what is already on my computer. Any information on how to fix this or on what may be the problem will be greatly appreciated.
Asked by unknown - Thu May 1 18:05:30 2008 - - 2 Answers - 0 Comments
Q. Every time I try to use my floppy drive to back-up my computer or to run a floppy or copy any information onto a floppy disk I get a message that says, "the drive is empty please insert a disk and retry",but my device manager says that my device is working properly . And when I try to update my driver I get a message that says that it cannot find a better one than what is already on my computer. Any information on how to fix this or on what may be the problem will be greatly appreciated.
Asked by unknown - Thu May 1 18:05:30 2008 - - 2 Answers - 0 Comments
How do I disable my internal webcam on a MacBook? Is there a device manager anywhere on the system?
Q. I want to find the MacOS device manager that will allow me to disable Webcams.
Asked by jerichovonhog - Sat Dec 29 04:47:05 2007 - - 1 Answers - 0 Comments
A. 10.4: Disable integrated iSight cameras Mon, Mar 26 '07 at 7:30Am pdt submitted by Anonymous System 10.4 I've been moved to action on this because of a recent NSA security document that states that it is not possible to disable the iSight cameras integrated into Apple computers without also disabling things like USB keyboards and mice. This is simply not true. When a program from OS X (Tiger at least) needs to access the integrated iSight camera, it has to call the QuickTimeUSBVDCDIgitizer. component. This file is located in the /System Library QuickTime folder. Simply deleting this file will prevent any program from being able to access it. Instead, the system will simply display a message stating that the hardware is already in… [cont.]
Answered by bob_geldoff19 - Sat Dec 29 04:55:15 2007
Q. I want to find the MacOS device manager that will allow me to disable Webcams.
Asked by jerichovonhog - Sat Dec 29 04:47:05 2007 - - 1 Answers - 0 Comments
A. 10.4: Disable integrated iSight cameras Mon, Mar 26 '07 at 7:30Am pdt submitted by Anonymous System 10.4 I've been moved to action on this because of a recent NSA security document that states that it is not possible to disable the iSight cameras integrated into Apple computers without also disabling things like USB keyboards and mice. This is simply not true. When a program from OS X (Tiger at least) needs to access the integrated iSight camera, it has to call the QuickTimeUSBVDCDIgitizer. component. This file is located in the /System Library QuickTime folder. Simply deleting this file will prevent any program from being able to access it. Instead, the system will simply display a message stating that the hardware is already in… [cont.]
Answered by bob_geldoff19 - Sat Dec 29 04:55:15 2007
Please can ne1 tell me how 2 re-install my ethernet back into device manager under network adapter?
Q. When I go to network adapter in device manager list the ethernet device is not listed.How do I get the ethernet device listed in the network adapter list in order to install it.
Asked by Atif A - Sat Feb 9 02:28:42 2008 - - 1 Answers - 0 Comments
Q. When I go to network adapter in device manager list the ethernet device is not listed.How do I get the ethernet device listed in the network adapter list in order to install it.
Asked by Atif A - Sat Feb 9 02:28:42 2008 - - 1 Answers - 0 Comments
My USB key is not reconized in my computer but is in device manager?
Q. I have windows 7 64 bits upgraded from vista 64 bits. When I do in devices and printer, my USB key is there. When I go in device manager, it's there as USB storage port. In Computer, it's not there. I don't know why. I'm desperated can someone help me to solve my problem? When i go in Disk Management, I can't change the letter. It gave me an error.
Asked by Minoma - Sun Mar 28 13:20:25 2010 - - 2 Answers - 0 Comments
Q. I have windows 7 64 bits upgraded from vista 64 bits. When I do in devices and printer, my USB key is there. When I go in device manager, it's there as USB storage port. In Computer, it's not there. I don't know why. I'm desperated can someone help me to solve my problem? When i go in Disk Management, I can't change the letter. It gave me an error.
Asked by Minoma - Sun Mar 28 13:20:25 2010 - - 2 Answers - 0 Comments
How to enable "Policy tab" in Device Manager -> Disk Drives?
Q. For some reason I'm missing "Policy Tab" in Device Manager -> Disk Drives Can anyone tell me how to restore it. Is it security? I have an administrator account.
Asked by Dima - Thu Jul 29 04:35:22 2010 - - 0 Answers - 0 Comments
Q. For some reason I'm missing "Policy Tab" in Device Manager -> Disk Drives Can anyone tell me how to restore it. Is it security? I have an administrator account.
Asked by Dima - Thu Jul 29 04:35:22 2010 - - 0 Answers - 0 Comments
From Yahoo Answer Search: 'device manager'
Thu Jul 29 16:53:36 2010 [ refresh local cache ]
[Hide]▼
greatmanuals.com
362px x 449px | 30.60kB
[source page]
keylogger software 3 Find and double click the network controller
[Hide]▲
